Diamond Wire for Marble Profiling
Model: WSDW-MP
Application: For cutting special shape of marble in short time
Beads Dia: 7.2-9.0mm
Reinforcement：Plastic
Beads No.: 33PCS/m, 37PCS/m
Diamond wire for marble profiling or slab
cutting
1. Smooth cutting & more precise;
2. Low power
consume and less raw material waste;
3. Low noise and less pollution;
4.
Easy manipulation and with low cost.
|
Diameter |
Code No. |
Fixing Type |
Beads No. pcs/M |
Material type |
Linear speed (m/s) |
Sawing speed (mm/min) |
Wire life (㎡/m) |
|
Ф9.0mm |
WS-DW-MP01 |
Plastic |
37 |
Soft Medium Hard |
30-35 |
30-40 28-35 25-30 |
20-35 |
|
Ф8.8mm |
WS-DW-MP02 |
Plastic |
33/37 |
||||
|
Ф8.5mm |
WS-DW-MP03 |
Plastic |
33/37 |
||||
|
Ф7.2mm |
SN-DW-MP04 |
Plastic |
33/37 |
Other specifications are available upon customer's requirements.
Recommendations:
1. The rotation of the wire should be regularly checked.
2. The worn condition of beads should be regularly inspected.
3. The worn condition of connections & the beads near connections should be regularly checked. Change connections when it needs.
4. The cable tension is set in 250-300kg (Φ4-5mm cable).
5. During the sharpening of a new wire, the liner speed should be reduced 2-3 m/s from the above standard.
6. Water requirement is between 15-25L/min.